所属分类：
设备名称：Rotary sand blasting machine S1820-8GW-8A
浏览次数：72
发布日期：2020-03-24
Product description
The equipment adopts the structure of 4 divisions and 8 stations rotary turntable. Simultaneous loading and unloading operations are performed at the same time as sand blasting operations, which improves production efficiency. A safety light curtain is installed in the loading and unloading work area to protect the workers in the loading and unloading area. The left and right sides and the rear side of the main machine are provided with access doors to facilitate the maintenance of the equipment. The blasting chamber is equipped with two lamps, and the state of the blasting operation can be observed through the rear door window. It adopts the principle of siphon-type blasting and is equipped with 8 blasting guns for continuous blasting operation. Pellet recycling adopts a wind recycling system, equipped with a two-layer vibration screening system, to finely separate the recovered pellets to improve the utilization rate and product quality of the pellets.
Comparison of shot blasting process
Rotary sand blasting machine S1820-8GW-8A | ||
| Serial number | Model parameter configuration | Standard type |
| 1 | Equipment application | Clutch springs, flywheels, gear ring gears and other parts smaller than 280mm in diameter |
| 2 | Equipment size（mm） | 3500*4600*3600 |
| 3 | Maximum part diameter（mm） | 280 |
| 4 | Maximum part weight（kg） | 5 |
| 5 | Maximum part height（mm） | 100 |
| 6 | Maximum shot peening height（mm） | 100 |
| 7 | Number of spray guns（kg/min | 1支/0-15 |
| 8 | Shot Peening Pressure（bar） | 0-6 |
| 9 | Steel shot size range（mm） | 0-220目刚玉 |
| 10 | Capacity (for example, 250 ring gear diameter) | 120件/h |
| 11 | Dust emissions（mg/m³） | 20 |
| 12 | Noise (when shot peening pressure is less than 3.5 bar) | ≤75 |
| 13 | Total power（kw） | 9.1 |
| 14 | Compressed air loss (when shot pressure is 5 bar) | 5Nm³/min |
| Serial number | Model parameter configuration | Standard type |
| 1 | Compact integrated design (3mm abrasion-proof and noise-resistant rubber inside) | ● |
| 2 | 8-station turntable | ● |
| 3 | Pellet wind recovery system | ● |
| 4 | Steel shot full filtration system | ● |
| 5 | Abnormal blast pressure alarm | ● |
| 6 | Abnormal blast flow alarm | ● |
| 7 | DC-4 filter cartridge dust collector | ○ |
| 8 | Dust collector secondary filter + silencer | ● |
| 9 | Automatic feeding system | ○ |
| 10 | Electric cabinet air conditioner | ○ |
| 11 | Tooling | ○ |
| 12 | Almen intensity tester | ○ |
| 13 | Steel Shot Testing Toolbox | ○ |
| 14 | Steel shot | ○ |
| 15 | Roughness Tester | ○ |
| 16 | Ground steel shot recycler | ○ |
| 17 | Wearing parts | ○ |
| 18 | Air compressor + air storage tank + cold dryer | ○ |
