Track Shot Blasting Machine SMB300-P11-1

产品参数

所属分类
设备名称:Track Shot Blasting Machine SMB300-P11-1

浏览次数:102
发布日期:2020-03-24

产品概述 技术参数

Comparison before and after shot blasting

Track Shot Blasting Machine SMB300-P11-1Product description


① This model adopts an integrated structure design. The whole machine is integrated into a single machine from the shot blasting room, the hoist, the dust collector, the electric box, etc., with a small footprint and convenient transportation;

② Made of polyurethane track, good toughness, high strength and abrasion resistance, shot blast cleaning for some parts that can collide with each other;

③ It is made of ordinary steel plate + Mn13 steel plate body, and the inner body protection plate is Mn13 steel plate, which is fixed by wear-resistant screws;

④The door body of the shot blasting chamber is controlled by a double-cylinder crank link mechanism. The upper and lower opening and closing operations make the door surface contact + EPDM rubber seals to prevent the shot body from splashing out of the chamber body. The automatic feeding system adopts a hydraulic control system. The system is equipped with a power-off, gas-holding and safety control system to improve the safety of the entire machine operation;

⑤The unloading system uses the motor to automatically unload the material. The workpiece storage frame is placed at the exit of the vibration. The height of the storage frame is 500mm (can be designed according to customer requirements). The workpiece is automatically transported into the storage frame. The whole machine adopts a full-automatic loading and unloading system, which can realize production operations connected with automated production lines, reduce various costs and improve production efficiency.

Track Shot Blasting Machine SMB300-P11-1margin-top:15px;Comparison of shot blasting process

Track Shot Blasting Machine SMB300-P11-1A. Installation instructions:

During installation, compare the general drawing of the equipment, place the main unit on the prepared foundation, fasten it with bolts, and install the upper part of the hoist to the main unit with bolts.

Install electrical conduit and complete wiring according to electrical drawings such as electrical schematics and interconnection diagrams

Place the spirit level on the bottom surface of the hopper, combine the base of the feeder, add the gasket and level it, and then tighten the bolt connecting the anchor bolt to the cleaning room

B. Commissioning instructions:

Adjust the position of the orientation sleeve opening

Adjust the shot supply valve and the amount of shot blasting according to the current display

Adjust the position of the counterweight to make the shot form a uniform waterfall

Adjust the upper pulley of the hoist to prevent misalignment of the belt

Adjust the sorter pipeline valve to achieve the separation effect

C. Equipment training content description:

Institutional performance and routine maintenance of equipment

Inspection method of wearing parts: replacement standard, cycle and method

Equipment operating procedures, technical requirements and methods for safe operation debugging


Track Shot Blasting Machine SMB300-P11-1

Serial number

Model parameter configuration

Economy 丨 Standard
1Equipment application

Rust removal on the surface of small castings / forgings, aluminum die castings, hardware and other parts

2Dimensions L * W * H (mm)2000*2000*2800
3End plate diameter (mm)

650

4Distance between end plates (mm)

900

5

Swelling (m³)

0.3
6

Maximum load (kg)

300
7Production cycle (per batch / min)8-155-10
8Dust emission(mg/m³)2010
9noise(db)≤75≤75
10Total equipment power(kw)16.920.9
11Compressed air loss(m/min)0.4
Serial number

Model parameter configuration

Economy 丨 Standard
1Shot blasting room full manganese steel body
2

Spiral pusher fault alarm system

3

Elevator shot recycling fault alarm system

4

DC-4 filter cartridge dust collector

●      
5

SMDC-25 Temperature Dust Collector

       ●
6

Q11 shot blasting machine

 ●       
7

P11 full machine plus shot blasting machine

      
8

Dust cyclone separation system

9

Automatic lifting door

10

Automatic feeding mechanism

11

Automatic cutting mechanism

12

Semi-automatic flow control system

13

Automatic flow control system

14Shot blasting machine frequency control
15

Electrical cabinet air conditioner

16

Storage bin alarm system

17

Soundproof room

18Vibrating screen steel shot sorting system
19

Tooling customization

20

Random Accessories