Catenary through shot blasting machine SCT-1216P11-3 / 6

产品参数

所属分类
设备名称:Catenary through shot blasting machine SCT-1216P11-3 / 6

浏览次数:150
发布日期:2020-03-24

产品概述 技术参数

Comparison before and after shot blasting

Catenary through shot blasting machine SCT-1216P11-3 / 6

Product description

① This model is a 6-station stepping hanging cleaning shot blasting machine, which has a high capacity among similar products. The blasting chamber body is made of all-manganese steel, which has sufficient rigidity and resistance to hitting. The maximum feed rotation diameter of the shot blasting chamber is 1200mm and the maximum feed height is 1600mm. It can load 800 kg parts;

② The equipment is equipped with 3 or 6 11kw high-performance throw heads, equipped with ABB motors. The uniformity of shot blasting is better, the cleaning efficiency is higher, and the overall energy consumption is lower;

③ The equipment is equipped with a SWDC-80 wet dust collector system. This system has a high efficiency dust removal effect, the dust emission reaches 20mg / m³, and it is safe, environmentally friendly, fireproof and explosion-proof, without any maintenance costs in the later stage.

Catenary through shot blasting machine SCT-1216P11-3 / 6

Comparison of shot blasting processCatenary through shot blasting machine SCT-1216P11-3 / 6

A. Installation instructions:

During installation, compare the general drawing of the equipment, place the main unit on the prepared foundation, fasten it with bolts, and install the upper part of the hoist to the main unit with bolts.

Install electrical conduit and complete wiring according to electrical drawings such as electrical schematics and interconnection diagrams

Place the spirit level on the bottom surface of the hopper, combine the base of the feeder, add the gasket and level it, and then tighten the bolt connecting the anchor bolt to the cleaning room

B. Commissioning instructions:

Adjust the position of the orientation sleeve opening

Adjust the shot supply valve and the amount of shot blasting according to the current display

Adjust the position of the counterweight to make the shot form a uniform waterfall

Adjust the upper pulley of the hoist to prevent misalignment of the belt

Adjust the sorter pipeline valve to achieve the separation effect

C. Equipment training content description:

Institutional performance and routine maintenance of equipment

Inspection method of wearing parts: replacement standard, cycle and method

Equipment operating procedures, technical requirements and methods for safe operation debugging


Mesh belt pass type shot blasting machine SND-1040P11-4 / 8

Serial number

Model parameter configuration

   Economy 丨 Standard
1Equipment application

Gears / pinions / castings

2Dimensions L * W * H(mm)

9500*9600*6200

3Feed opening size: rotation diameter * high(mm)

1200*1600

4

Spreader rotation diameter(mm

1200

5

Load (including tooling) Load (including tooling)(kg)

500
6

Number of stations(个)

 6
7Dust emission(mg/m³) ≤50丨≤20
8noise(db) ≤85丨≤80
9

Total equipment power(kw)

 59.75丨70.75
10

Compressed air loss(m³/min)

0.5
Serial numberModel parameter configurationEconomy 丨 Standard
2

Shot blasting room full manganese steel body

●丨
3

Spiral pusher fault alarm system

丨●
4

Elevator shot recycling fault alarm system

丨●
5

DC-12Cartridge dust collector

      
6

SWDC-100Wet dust collector

丨●
7

Q11Shot blaster


8

P11Full machine plus shot blasting machine

丨●
9

Spreader automatic feeding and discharging systemCatenary through shot blasting machine SCT-1216P11-3 / 6

      ●
10

Semi-automatic flow control system

11

Automatic flow control system

丨●
12

Shot blasting machine frequency control

      ● 
13

Electric cabinet air conditioner

 ●
14

Soundproof room

         
15

Tooling customization

16Storage bin alarm system
17

Random Accessories

  ○