Hanging shot blasting machine SHB2-1717P11-3

产品参数

所属分类
设备名称:Hanging shot blasting machine SHB2-1717P11-3

浏览次数:143
发布日期:2020-03-24

产品概述 技术参数

Comparison before and after shot blasting

Hanging shot blasting machine SHB2-1717P11-3Product description


① This model is a medium-sized hanging cleaning shot blasting machine, and the body of the shot blasting chamber is made of all-manganese steel. The maximum feed rotation diameter is 1700mm, the maximum feed height is 1700mm, and 800 kg parts can be mounted;

② The equipment is equipped with three 11kw high-performance throw heads and ABB motors. The uniformity of shot blasting is better, the cleaning efficiency is higher, and the overall energy consumption is lower;

③ The equipment is equipped with a SWDC-80 wet dust collector system. This system has a high efficiency dust removal effect, the dust emission reaches 20mg / m3, and it is safe, environmentally friendly, fireproof and explosion-proof, without any maintenance costs in the later period.

Advantages of shot blasting

Hanging shot blasting machine SHB2-1717P11-3


A. Installation instructions:

During installation, compare the general drawing of the equipment, place the main unit on the prepared foundation, fasten it with bolts, and install the upper part of the hoist to the main unit with bolts.

Install electrical conduit and complete wiring according to electrical drawings such as electrical schematics and interconnection diagrams

Place the spirit level on the bottom surface of the hopper, combine the base of the feeder, add the gasket and level it, and then tighten the bolt connecting the anchor bolt to the cleaning room

B. Commissioning instructions:

Adjust the position of the orientation sleeve opening

Adjust the shot supply valve and the amount of shot blasting according to the current display

Adjust the position of the counterweight to make the shot form a uniform waterfall

Adjust the upper pulley of the hoist to prevent misalignment of the belt

Adjust the sorter pipeline valve to achieve the separation effect

C. Equipment training content description:

Institutional performance and routine maintenance of equipment

Inspection method of wearing parts: replacement standard, cycle and method

Equipment operating procedures, technical requirements and methods for safe operation debugging






Hanging shot blasting machine SHB2-1717P11-3

Serial number

Model parameters

  Economy 丨 Standard
1Equipment application

Gears / pinions / castings, etc.

2Dimensions L * W * H(mm)

7200*7300*6400

3Feed opening size: rotation diameter * high(mm)

1700*1700

4Operating mode

Hook type (double station)

5

Spreader rotation diameter(mm)

1700
6Load (including tooling)(kg)1000-2000
7Production cycle (per batch / min) 10-155-8
8Dust emission (mg / m³)≤50≤20
9noise(db) ≤85≤80
10Total equipment power(kw) 35.544.8
11Compressed air loss(m/min)0.5
Serial number

Model parameters

    Economy 丨 Standard
1Shot blasting room full manganese steel body
2

Spiral pusher fault alarm system

3

Elevator shot recycling fault alarm system

4

DC-12Cartridge dust collector

●     
5

SMDC-100Wet dust collector

     ●
6

Q11Shot blaster

    
7

P11Full machine plus shot blasting machine

     ●
8

Dust cyclone separation system

9Automatic lifting system
10

Spreader automatic feeding and discharging system

11

Semi-automatic flow control system

     
12

Automatic flow control system

     ●
13

Shot blasting frequency conversion

14Electric cabinet air conditioner      ●
15

Storage bin alarm system

      ●
16

Soundproof room

17

Vibrating screen steel shot sorting system

○  
18Tooling customization
19Random Accessories