Classification:Shot Blasting Equipment
Device name:Hook shot blasting machine SHB2-1216P11-2
Browse times:342
Release date:2020-03-24
Comparison before and after shot blasting
product description
① This model is a medium-sized hanging and cleaning shot blasting machine. The maximum feed rotation diameter is 1200mm, the maximum feed height is 1600mm, and 800 kg parts can be mounted;
② The equipment is equipped with two 11kw high-performance throw heads, equipped with ABB motors. The uniformity of shot blasting is better, the cleaning efficiency is higher, and the overall energy consumption is lower;
③ The equipment is equipped with a SWDC-80 wet dust collector system. This system has a high efficiency dust removal effect, the dust emission reaches 20mg / m³, and is safe, environmentally friendly, fireproof and explosion-proof, without any maintenance costs in the future.
Comparison of shot blasting process
A. Installation instructions:
During installation, compare the general drawing of the equipment, place the main unit on the prepared foundation, fasten it with bolts, and install the upper part of the hoist to the main unit with bolts.
Install electrical conduit and complete wiring according to electrical drawings such as electrical schematics and interconnection diagrams
Place the spirit level on the bottom surface of the hopper, combine the base of the feeder, add the gasket and level it, and then tighten the bolt connecting the anchor bolt to the cleaning room
B. Commissioning instructions
Adjust the position of the orientation sleeve opening
Adjust the shot supply valve and the amount of shot blasting according to the current display
Adjust the position of the counterweight to make the shot form a uniform waterfall
Adjust the upper pulley of the hoist to prevent misalignment of the belt
Adjust the sorter pipeline valve to achieve the separation effect
C. Equipment training content description:
Institutional performance and routine maintenance of equipment
Inspection method of wearing parts: replacement standard, cycle and method
Equipment operating procedures, technical requirements and methods for safe operation debugging