The shot blasting machine belongs to the surface treatment equipment of large-scale steel castings, and the operation must also be performed by a special person. The operating staff must also perform pre-post training, not only to understand the duties of the job, but also Learn how to operate the shot blasting machine, how to regularly maintain the shot blasting machine, how to deal with the shot blasting machine in the event of a failure, the working principle of the shot blasting machine, and the operating techniques are all things that the operator of the shot blasting machine must learn.
First of all, when operating the shot blasting machine, some things must be banned. This is for the good of the machine and also to avoid larger accidents. When operating the shot blasting machine, personnel who do not have protective equipment must not be allowed to operate the shot blasting machine. This is irresponsible to workers. When operating the shot blasting machine, they must wear protective clothing and protective glasses.
Secondly, when recovering the iron sand in the shot blasting machine, it is necessary to first turn on the dust removal fan, the horizontal spiral, the bucket elevator and the vertical spiral, so that the iron sand that has been cleaned up can be safely recovered. Regarding the maintenance method of the shot blasting machine, it is necessary to periodically turn on the dust removal pulse to clear the dust in the machine equipment. After each shot blasting machine is finished, let the dust removal pulse blow back for at least 30 minutes. Pill machine, but never remove the dust inside the machine.
Later, when operating the shot blasting machine, it is also forbidden to continuously turn on each control switch on the machine for a short period of time. This is to prevent the instrument panel from being burned out by excessive current. Start another switch again.